Air pollution and young children's inhalation exposure to organophosphorus pesticide in an agricultural community in Japan

Assessment of airborne organophosphorus pesticides in houses of young children (1-6 years old) and childcare facilities was conducted following pesticide applications in an agricultural community in Japan. Trichlorfon and fenitrothion, applied in two separate periods, were frequently detected from outdoor and indoor air. Dichlorvos, the primary degradation product of trichlorfon, was also detected after the application of trichlorfon. Both the outdoors and indoor concentration of applied pesticide were shown to increase with decreasing distance from the pesticide-applied farm. Indoor concentration of these pesticides significantly correlated with outdoor concentration (p=0.001 for trichlorfon and p=0.001 for fenitrothion), indicating infiltration of applied pesticide inside. Ratio of indoor to outdoor concentration (I/O ratio) of fenitrothion was higher for houses with windows open during the application than those with closed windows (median value: 0.74 vs. 0.16, p=0.003). However, a similar trend was not observed for trichlorfon as well as dichlorvos in the first period. Dichlorvos was found to have a higher I/O ratio than trichlorfon during the period, and clear correlation between indoor concentrations of dichlorvos and those of trichlorfon suggested increased decomposition of trichlorfon in the indoor environment. Daily inhalation exposure estimated by using the fixed measurement data and time-activity questionnaire ranged from 0 to 35 ng/kg/day for trichlorfon, from 0 to 26 ng/kg/day for dichlorvos, and from 0 to 44 ng/kg/day for fenitrothion. Median inhalation exposure from indoor air accounted for 74%, 86.3%, and 45% of the daily inhalation exposure, respectively. For kindergarteners or nursery school children, inhalation exposure at childcare facilities was comparable with or more than that at home, indicating that pollution level at childcare facilities had potential of high impact on children's exposure. Estimated daily inhalation exposures were inversely correlated to the proximity of their activity location to the pesticide-applied farm.     

丰镇发电厂送风系统噪声原因分析及降噪研究

振动和噪声普遍存在于火电厂锅炉送风系统中 ,是电厂噪声污染的一个重要来源 ,严重影响电厂安全、经济、文明运行。有效地降低送风系统的振动和噪声是火电厂急需解决的问题。笔者针对丰镇火电厂送风系统结构和运行参数 ,对由此产生的噪声进行了细致的测量 ,分析了产生振动和噪声的原因 ,认为送风机蜗舌处产生的气动噪声和管道二次涡流是引发送风系统振动和噪声的主要原因。根据产生振动和噪声的原因 ,并结合电厂要求 ,进行了技术改造即在直管中安装栅格网及弯管处安装导流栅以消除局部涡流。技术改造方案实施后经测量的结果表明 ,冷风道的噪声下降了 7～ 1 6dB ,明显降低了送风系统的振动和噪声。     

两种掺气水流的计算模型比较

在污水压力输送管道中，污水中气体的存在会影响液体的流动，以污水管中的气、液相流为研究对象，运用集中空穴模型（气泡离散分布模型）和均匀分布模型两种计算方法，来研究停泵水锤过程的压力和流速的变化趋势，实例计算结果表，在设有止回阀的水锤现象中，利用离散分布模型所得的最高水位要比利用均匀分布模型的计算值高，在不设止回阀的水锤现象中，两者的结构基本保持一致。均匀分布模型假定气体在水中呈均匀分布，因此在计算断面上的气体量变化不如离散分布模型来得剧烈，其水位正峰值比离散分布模型低，负峰值比离散分布模型高。     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

人工曝气复氧整治污染河流

向受到严重有机污染的河流充入溶解氧可以有效消除水体的黑臭,改善水质和恢复生态平衡。文章总结了纯氧增氧系统、鼓风机———微孔布气管曝气系统、叶轮吸气推流式曝气器和水下射流曝气设备等多种使用于河道人工曝气复氧的技术;并列举大量国内外的相关工程实例说明这些技术在实践中的有效性。     

天然气应用对兰州大气环境的影响

煤烟型污染是兰州市大气污染严重的主要原因之一，西气东输工程对改变兰州市能源结构，改善城市环境质量具有非常重要的意义。根据兰州市大气污染现状和特性，以2000年为基准，分析研究了兰州市利用天然气前后能源结构，主要污染源及大气污染物排放量的变化。针对污染源状况和兰州市天然气用气规划，选用适宜模式预测了兰州市利用天然气后的各主要污染物的年平均浓度，计算了空气质量的改善程度。     

空气质量AQI实时发布的改进探讨

针对《环境空气质量指数(AQI)技术规定(试行)》(HJ 633-2012)中对空气质量AQI实时发布存在的欠缺,从增加颗粒物1 h浓度的AQI分级浓度限值及颗粒物24 h滑动平均值计算方法改进着手,解决PM2.5和PM10的24 h滑动平均值实时延迟、1 h平均值代替24 h滑动平均值偏高等问题。     

济南市空气污染现状及控制对策

利用2013年1—12月济南市大气监测数据,分析该市空气质量现状及时空分布特征,结果表明:2013年济南市空气主要污染物质量浓度均超过《环境空气质量标准》(GB 3095—2012)二级标准限值,空气污染严重时段为冬季采暖期,颗粒物污染严重区域为该市西部和西北部地区,SO2、NO2污染严重区为中心城区,并从点源、面源和移动源3个方面提出相应的污染防治对策。在SO2、NOx和工业烟粉尘分别减排22.5%、18.2%和31.4%的条件下,运用Models-3/CMAQ模型模拟计算得出:2015年1月和7月,济南市空气中SO2、NO2、PM10和PM2.5的质量浓度与2010年同期相比将分别降低23.9%和29.7%、11.4%和15.9%、21.9%和32.6%、13.5%和26.9%,空气质量得到明显改善。     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.